Quoting a luxury rigid box without locking greyboard caliper alongside wrap paper weight and wall build-up risks lid bowing, tight insert fit, and hidden dimension shifts between sample and bulk runs.
Match greyboard across Zhypacking's 1.0–3.0 millimeters range and 128–157 gsm wrap paper to your box span, internal cavity offset, ~7-working-day physical sample check with fee credit, and 200 pcs for rigid boxes per size for each style B2B ordering rules.
直接回答: Match rigid box greyboard thickness across 1.0–3.0 millimeters to your longest unsupported wall span and load — using light 1.0–1.5 millimeters for compact jewelry or cosmetic boxes, intermediate 1.6–2.4 millimeters (commonly 1.8–2.0 millimeters) for standard A5/A4 magnetic and drawer boxes, and heavy 2.5–3.0 millimeters for large A3 or weighted presentation kits — paired with 128–157 gsm coated art or specialty wrap; confirm internal cavity L×W×H wall offset on a ~7-working-day physical sample before locking 200 pcs for rigid boxes per size for each style (B2B production orders only).
Rigid Box Greyboard Thickness: Caliper Selection Verdict
In luxury packaging manufacturing, greyboard (rigid recycled chipboard) forms the structural core beneath decorative paper, caliper defines that board core’s thickness in millimeters, and V-grooving cuts clean fold channels so walls meet at crisp 90-degree edges rather than rounded folding-carton or fluted corrugated bends. Unlike folding cartons printed on a single sheet of thin paperboard, rigid boxes stay fixed or fold-flat on a 1.0–3.0 millimeters greyboard skeleton sized to the longest unsupported wall span, product load, and closure type; under-specifying caliper risks crushed corners, while over-specifying caliper on compact boxes raises unit material cost and export freight cost. This specification guide applies strictly to B2B factory production orders (not single-unit retail, craft, or DIY orders).
Selection-tier baseline note: The light, intermediate/medium, and heavy tiers below serve as illustrative span-matching starting points within Zhypacking’s 1.0–3.0 millimeters range — confirm exact board deflection by micrometer before bulk release.
| Greyboard Caliper Tier | Best-Fit Box Footprint & Load | Primary Structural Risk if Wrong | Sample Verification & Next Step |
|---|---|---|---|
| Light (1.0–1.5 millimeters) | Compact cosmetics, watch boxes, and small jewelry lid-and-base sets | Using thin board across wide spans leads to concave lid bowing and soft corners | Test wall stiffness and squareness on a ~7-working-day physical sample |
| Medium (1.6–2.4 millimeters; 1.8–2.0 millimeters common) | Standard A5/A4 magnetic closure boxes, skincare kits, and sliding drawer sleeves | Wrong caliper shifts internal cavity clearance and causes lid suction or drawer bind | Confirm lid snap and insert fit before locking 200 pcs for rigid boxes per size for each style |
| Heavy (2.5–3.0 millimeters) | Large A3 presentation kits, multi-bottle spirits, heavy jars, and double-tier boxes | Shallow V-grooves or stiff wrap tension cause spring-back or wrap cracking on dark ink | Verify V-groove angle, 128–157 gsm wrap fold, and the agreed sampling plan acceptance criteria |
At Zhypacking’s Xiamen factory, custom rigid boxes start at 200 pcs for rigid boxes per size for each style (or 50–60 stock collapsible magnetic boxes per stock style where confirmed per inquiry, rounded up to full master cartons of 20 or 25 boxes in 15 working days). Request a quote to lock your production schedule: physical sample turnaround takes around seven working days with the sample fee credited toward bulk production, and standard bulk lead time is 15–30 working days after sample and artwork approval.
Compare the supplier record with On the validity of the Moes iso-viscous — Rigid film thickness… 要件を受け入れる前に照合してください。.
Caliper Selection Matrix Across Standard Millimeter Ranges
Every millimeter added to greyboard thickness changes both wall stiffness and the internal-to-external dimension offset across every base, lid, and sleeve. Standardized micrometer protocols — specifically ISO 534:2011 (Paper and board — Determination of thickness, density and specific volume) alongside TAPPI T 411 single-sheet testing — measure board thickness under controlled platen pressure before converting begins. Note the wall-offset math carefully on your dieline: Outer Width = Internal Width + 2 × (board caliper + wrap paper & glue allowance). For example, stepping a base from 1.5 millimeters up to 2.5 millimeters board on a fixed outer footprint shrinks internal cavity width by 2.0 millimeters unless the internal cavity is held constant first; review our collapsible rigid box sample approval guide before freezing insert cutouts.
| 仕様 | 許容範囲 | Procurement Risk | 検証チェック | Next Action |
|---|---|---|---|---|
| Core greyboard caliper | Exact target within 1.0–3.0 millimeters per component (lid, base, or spine) | Unapproved thinner board substitutes cause bowed A4/A3 lids or weak hinges | Measure raw sheet and wrapped wall thickness with a micrometer (ISO 534 / TAPPI T 411) on the sample | Record component-level millimeter caliper on the written RFQ sheet |
| Wrap & internal cavity offset | 128–157 gsm coated art or specialty wrap plus adhesive allowance per wall | Treating outer box dimensions as internal L×W×H crushes trays and glass bottles | Fit actual product and insert inside the ~7-working-day physical sample | Label every dieline dimension explicitly as internal usable L×W×H |
| V-groove & board density step | Groove depth tuned to 1.0–3.0 millimeters core (including 1.6–2.4 millimeters mid steps) | Shallow cuts bow corners outward; over-deep cuts weaken spine seams | Audit all four corners and closure fit under the agreed sampling plan pre-shipment inspection | Sign retained master sample and archive die record at Xiamen factory |
Confirm in writing whether quoted dimensions represent internal cavity clearance or closed exterior envelope, and verify intermediate steps (such as stepping 1.8 to 2.2 millimeters on deeper lids) on a signed physical sample before mass production.
RFQチェックポイント
Send your internal L×W×H dimensions, contained product weight, box structure, and preferred greyboard caliper on the custom rigid boxes page.

Span Rules by Box Style: Lid-and-Base, Magnetic, and Drawer
Different rigid box architectures distribute mechanical stress across distinct panels, meaning a caliper that holds square on a shallow two-piece lid-and-base box carries a severe bowing or binding defect risk on a hinged book box or sliding drawer sleeve. Buyers evaluating カスタムパッケージングソリューション across fixed set-up and flat-packed styles should ask the factory engineering team five structure-specific verification questions before approving tooling on the quote:
- Two-piece lid-and-base telescope boxes: How much air-release clearance is built between the outer lid skirt and base wall so the lid avoids the risk of suction binding or dropping loose?
- Full-overlap hinged gift boxes: Does the front flap overlap cleanly with balanced lid-to-base greyboard caliper so side walls stay flush and square on display?
- Hinged magnetic book-style boxes: Is the spine board caliper paired with multi-point magnet catches so wide A4 or A3 lids avoid corner lift failure and snap flat?
- Collapsible fold-flat rigid boxes: Do the scored side walls and corner adhesives hold square against the front flap without crease cracking defects after repeated flat-to-erect assembly checks?
- Sliding drawer (matchbox) rigid boxes: What clearance tolerance is reserved between the inner drawer tray and outer sleeve so humidity or lamination buildup never creates a jamming risk on the ribbon pull?
Pairing 128–157 gsm Coated Art and Specialty Wrap Papers
Core board thickness cannot be chosen in isolation because the 128–157 gsm outer wrap paper, inner liner, lamination film, and adhesive cure together as one laminated sandwich. Matching wrap paper grain direction, lamination film, and counter-lining keeps rigid lids flat across humid export routes.
確認すべき判断基準
Rigid greyboard never appears bare on a finished gift box; Zhypacking wraps the 1.0–3.0 millimeters core in 128–157 gsm coated art paper or textured specialty paper. Because adhesive introduces moisture during automated factory wrapping, unbalanced sheet tension between exterior wrap and interior lining can pull wide panels into a slight curve while drying — pair rigid exterior finishes cleanly with カスタム印刷ティッシュペーパー製品 inside the cavity rather than adding unnecessarily heavy interior liners that shift clearance.
送信すべきRFQ詳細
Coated art paper in the 128–157 gsm range supports CMYK offset printing, Pantone/PMS spot colors, matte or gloss lamination, soft-touch film, spot UV, embossing, and hot foil stamping. List exact wrap gsm, lamination type, and interior liner spec on your RFQ so factory quoting prices matched tension layers.
生産引き継ぎの詳細
When wrapping heavy 2.5–3.0 millimeters greyboard with full-bleed dark inks, inspect pre-production samples closely at 90-degree V-grooved folds to avoid the risk of wrap spring-back, edge delamination, or white crease cracking defects under lamination.
Corner V-Grooving and ~7-Working-Day Sample Verification
Once caliper and wrap weight are paired, V-grooving accuracy determines whether thick 1.0–3.0 millimeters greyboard folds into sharp 90-degree corners without bulging seams or wrap cracking. Verifying groove depth and board deflection on a ~7-working-day physical sample prevents container-level tooling defects.
サプライヤーに依頼すべき証拠
Sharp 90-degree edges separate a true rigid gift box from a rounded folding carton, and that crisp geometry comes from precision V-grooving along the fold line of the 1.0–3.0 millimeters greyboard rather than simple crease scores. By cutting a clean V-shaped channel partway through the board, outer walls fold flat against each other at a square corner without bulging or corner splitting risk.

サンプル承認の証拠
Zhypacking’s sample room produces physical rigid and collapsible box samples in around seven working days once structure and specifications are agreed, and credits the sample fee toward the subsequent bulk order. Press along all V-grooved edges to confirm zero hollow gap beneath the 128–157 gsm wrap and load the actual product and insert to test wall deflection.
再発注管理記録
Sign a retained master sample and lock the cutting die and printing plate record at the factory so bulk production and repeat orders reference the exact same board caliper without drift.
Pre-Shipment Sampling Checks for Board Flatness and Fit
Even when a pre-production sample passes every bench test, mass production across hundreds or thousands of boxes requires disciplined moisture conditioning and glue-line monitoring so bulk shipments do not warp in sea containers. Zhypacking’s in-house inspection team audits finished orders under Acceptable Quality Limit (AQL) level 2.5 pre-shipment sampling inspection (aligned with standardized attribute-sampling statistical practice in the NIST/SEMATECH e-Handbook of Statistical Methods, Section 6.2) prior to dispatch from Xiamen (with a confirmed plus or minus three percent bulk quantity tolerance); align your board caliper, wrap finish, and 客製化包裝訂製 tolerances before mass production begins. Include these five board-stability checkpoints in your pre-shipment inspection sheet:
- Micrometer board-caliper audit: Verify that production greyboard matches the approved 1.0–3.0 millimeters specification rather than a thinner substitute lot.
- Flat-surface lid rock check: Place pulled lids and bases on a flat granite or steel plate to confirm zero diagonal twisting or concave panel bowing after glue curing.
- Corner turn-in and ear adhesion: Inspect interior corner turn-ins (ears) for full glue tack, clean 128–157 gsm wrap folds, and zero exposed raw greyboard at V-groove vertices.
- Lid-slide and magnet-snap repeatability: Test repeated open-and-close operation across pulled cartons so telescope friction and magnetic flap alignment match the signed sample.
- Export master-carton moisture protection: Confirm inner polybagging, desiccant placement when required, and neutral outer carton strength before ocean or air booking.
Rigid Box Greyboard Caliper FAQ
What greyboard thickness range does Zhypacking use?
Zhypacking supplies custom fixed and collapsible rigid gift boxes in the confirmed 1.0–3.0 millimeters greyboard range, starting at 200 pcs for rigid boxes per size for each style (plus stock collapsible magnetic styles at 50–60 boxes per stock style where confirmed per inquiry, rounded up to 20- or 25-box master cartons). Compact items stay at 1.0–1.5 millimeters, mid-span magnetic or drawer styles use intermediate 1.6–2.4 millimeters, and heavy A3 kits step up to 2.5–3.0 millimeters.
Which wrap paper weights pair with rigid box greyboard?
Every 1.0–3.0 millimeters greyboard core is wrapped in 128–157 gsm coated art paper or specialty textured paper with matte, gloss, or soft-touch film. Balancing wrap gsm against board caliper keeps V-grooved folds crisp without cover cracking or warpage.
How should buyers verify caliper and lid fit on samples?
Order a physical sample — produced in ~7 working days after spec confirmation, with the sample fee credited toward your bulk run — to test wall stiffness, lid slide or magnetic snap, and flat-plate stability before approving the 15–30 working day bulk production run.
Does board caliper change internal box dimensions?
Yes. Each wall adds greyboard thickness plus wrap paper and glue allowance on opposite sides, reducing internal clearance whenever heavier caliper is chosen within the same outer footprint. Lock internal usable L×W×H dimensions first on your dieline.
結論として
Locking greyboard caliper within the 1.0–3.0 millimeters range alongside 128–157 gsm wrap paper before sampling prevents bowed lids, bound drawer sleeves, and wrong internal cavity clearance. Make board caliper, V-groove seam checks, internal L×W×H dielines, and Acceptable Quality Limit (AQL) level 2.5 inspection terms mandatory fields on every B2B RFQ sheet.
Zhypacking’s Xiamen factory produces custom fixed and collapsible rigid gift boxes starting at 200 pcs for rigid boxes per size for each style (plus stock collapsible magnetic runs at 50–60 boxes per stock style where confirmed per inquiry, rounded up to full master cartons), backed by ~7 working days for physical samples with fee credit, plus or minus three percent bulk quantity tolerance, and free repeat die and plate retention. Submit your internal dimensions and board spec on the rigid boxes paper boxes page for an engineering quote.
Editorial verification note (updated , Zhypacking Packaging Engineering & QC Editorial Team): Greyboard caliper ranges (1.0–3.0 millimeters), 128–157 gsm wrap options, custom and stock MOQ boundaries, ~7-working-day sample turnaround with fee credit, tooling retention, plus or minus three percent quantity tolerance, and the agreed sampling plan inspection policy reflect published Zhypacking Xiamen sourcing guidelines; exact structural caliper recommendations should be confirmed per inquiry on a signed physical sample.
パッケージングに関する質問をする